Course: Mechanical Engineering
Department of Mechanical and Aerospace Engineering, Faculty of Engineering
Course: Mechanical Engineering Science, Mechano-Informatics and Systems
Department of Mechanical Science and Engineering, Graduate School of Engineering
HOME > Thesis titles
|
（Academic Year 2012）Mechanical Engineering Science：Advanced Materials and Manufacturing
| Material Characterization & Mechanics (Ju lab.) |
A study on quantitative evaluation of pipe wall thinning using frequency characteristics of microwave |
|---|---|
| Evaluation of stem cell-ECM adhesion by ECM deformation measurement using digital image correlation method | |
| Study on fabrication of anodic oxide porous alumina templates and devevopment of nanowire surfece fasteners | |
| In vitro experimental study on the differentiation property of Mesenchymal stem cell under cyclic stretch with a non-uniform deformation field | |
| Optimizaion of Sn nanoparticle fabrication and evaluation of size effect on the melting point | |
| Study on nondestructive evaluation of thermal fatigue cracks on metal surface | |
| Synthesis of Fe3O4 / Au composite nanoparticles and evaluation of their properties | |
| Ultraprecision Engineering (Shamoto lab.) |
Proposal of a solution for unit processing time job shop scheduling problem |
| Identification of material properties of polishing pad using an on-machine compression tester | |
| Cuvature optimal corner smoothing algorithm for three and five axes trajectory generation | |
| Suppression of vibration in cutting by means of intelligent friction pad | |
| Cutting force model in milling operation by using self-propelled rotary tools | |
| Manufacturing Process (Umehara lab.) |
Static and kinetic friction coefficient of carbon fiber brush to reduce its wear |
| Influence of the atmosphere on the structural changes in the carbon nitride coating by UV irradiation | |
| Development of method to collect wear particles in the oil in friction between the DLC | |
| Improvement of DLC (Diamon-Like Carbon) film by shot-peening | |
| Superlow friction coefficient of TaC/a-CNx in ambient air | |
| Reduction of friction of DLC against itself under flat surface contact | |
| Development of MVP-DLC method employing gas blowing | |
| Computational Solid Mechanics (Ohno lab.) |
Compressive strength analysis of multilayered corugated paperboard with A- and B-flutes using a homogenization method |
| Discrete dislocatoin plasticity analysis of activated dislocation sources using a checkerboard polycrystal model - Effect of crystal misorientation - | |
| Optimization of MEAM potential parameters for molecular dynamics simulations of plastic deformation in b-Sn | |
| Basic study on thermal ratcheting behavior of ferritice heat-resistant pipe elements at very high temperatures | |
| Elastic homogenization anaysis of tube-fin structures subjected to combined bending and compression | |
| Diameter and chirality dependences of flattening-induced electronic changes in boron nitride nanotubes |
Mechanical Engineering Science：Thermo-Fluids and Environmental Engineering
| High-temperature energy conversion engineering (Naruse lab.) |
Change of ash compositions in cokes during combustion |
|---|---|
| Gasification behaviors of woody biomass in a packed bed reactor | |
| Oxy-fuel combustion behaviors of coal in a fluidized bed | |
| Analysis of tar generated during pyrolysis of waste plastics and its steam cracking | |
| Ash particle formation during combustion of a simulated coal | |
| Power generation characteristics of solid oxide fuel cell by carbonaceous fuel | |
| Emissions of trace elements from coal gasification process | |
| Reduction behaviors of iron oxides by woody biomass | |
| Statistical Fluid Engineering (Sakai lab.) |
Measurement of fluctuating temperature and analysis of eigenmode by KL expansion in a heated plane jet |
| Two-point spacial velocity correlation of the turbulent boundary layer influenced by a cylinder wake from two-point measurments | |
| An experimental study on interactions between grid turbulence and a shock wave | |
| Study on a high-schmidt-number scalar diffusion field in a reactive planar jet | |
| Concentration measurement of zincate ion near the zinc anode by Background Oriented Schlieren (BOS) technique | |
| Direct numerical simulation of isotropic turbulence interacted with a shock wave | |
| Stereo PIV measurement of grid turbulence in liquid phase | |
| Heat Transfer & Combustion Engineering (Yamashita lab.) |
Numerical study of the effects of ion additive on ignition characteristics of methane-air mixture |
| A Study on DPF Filtration Performance | |
| Numerical study on combustion characteristics of rich-premixed gas opposed by high-temperature air using elementary reaction kinetics with distinguishable oxygen | |
| Numrical Study on Interaction between Flame and Wall of Propane-air Premixed Flame | |
| Effect of Atmospheric Pressure Plasma on Soot and NOx Emissions | |
| Numerical Simulation on Flow in Column Chromatography | |
| Investigation of Effects of Inert Gases on Combustion Characteristics of Premixed Flame with Curvature by PLIF |
Mechano-Informatics and Systems：Biomechanics and Human-Machine Systems
| Biomechanics (Tanaka lab.) |
Response of brain under rotational impact |
|---|---|
| Finite element analysis of femur damage by knee-impact test | |
| Modeling of skeletal muscle in isotonic contraction | |
| Evaluation of shock-absorbing function for hip protector | |
| Development of simulation of hip fracture | |
| Development of experimental evaluation system for hip protector | |
| Effect of falling posture on hip fractures in backward falls | |
| Safety Intelligence (Yamada lab.) |
Manipulation of Perceived Friction by Asymmetric Lateral Vibrotactile Simulus |
| Wearable Device to Simulate Equinovarus for Supporting Training of Physical Therapists | |
| Study on Planetary Exploration Spacecraft with Base-Extension-Separation-Mechanism | |
| Construction of Collision Simurator Taking Avoidance Reaction into Consideration to Mechanical Hazard Rapidly Approaching Eye | |
| Controller Design Method for Power Assist Systems Consisting of Plural Mechanical Systems | |
| Development of Specialized Dummy Coating for Viscoelasticity of Skin for Dummy for Safety Tests | |
| Safety Intelligence (Obinata lab.) |
Order Reduction on Mechanism and its Control System of Manipulator |
| Study on Characteristic of Tracking Force in Roboｔ Training | |
| Simulation of Rat Walking Based on Neural Oscillator | |
| Comparative evaluation of Simulation and Human Walking with Power Assist Orthosis | |
| Quantitative Evaluation of Driver's Mental Workload Using Eye Movements | |
| Human System Engineering (Mizuno lab.) |
The influence of vehicle pitching on occupant responses in vehicle frontal crashes |
| Energy absorbing performance of cyclist helmet for head protection | |
| Pedestrian kinematic behavior considering pedestrian walking posture in vehicle-pedestrian collisions |
Mechano-Informatics and Systems：Micro-Nano Mechanical Systems
| Micro-Nano System Controle Engineering (Fukuda lab.) |
Autonomous cooperative electric power distribution with prediction error |
|---|---|
| Built-in capacitive microsensors into artificial blood vessel model | |
| Biped walking control by arm swing for humanoid robot | |
| Invariable symbol sharing algorism for cognitive sharing of multi-robot | |
| Walking aid by Intelligent Cane robot with human usage | |
| Experimental identification of Petri Net Operator by DNA calculation | |
| Biochemical Micro System Engineering (Arai lab.) |
Stable generation of microscopic plasma bubble |
| Stress measurement of microscopic region using photoelasticity | |
| Fabrication of magnetically driven microtool by 3D microfabrication and enucleation of oocyte | |
| Culture evaluation system of layered cells made by 3D assembly | |
| Mechanics & Electronics Engineering (Hata lab.) |
Accelerometer based on thermal detection for wearable sensing system |
| Fracture strength of Si cantilever produced by MEMS process | |
| Development of microneedle array by combined materials | |
| Thermal flow sensor produced by parylene micromachining | |
| Development of shear stress sensor based on optical detection | |
| Development of catheter flow sensor for evaluating breathing properties in lung system | |
| Micro Thermal Fluid Engineering (Niimi lab.) |
Molecular Dynamics Simulation on Accommodation Coefficient in Gas-Surface Interaction |
| Pressure Measurement in a Micro-channel by Presssure-Sensitive Molecular Film | |
| Study on Basic Characteristics of Knudsen Pump |
|
（Academic Year 2012）Mechanical Engineering Science：Advanced Materials and Manufacturing
| Material Characterization & Mechanics (Ju lab.) |
Functional improvement and mechanical evaluation of fatigue crack healing by surface-activated pre-coating method |
|---|---|
| Experimental study on sensitivity enhancement of solar cells using localized surface plasmon resonance of Au nanoparticles | |
| Fabrication of anodic oxide porous alumina templates and devevopment of nanowire surfece fasteners | |
| Measurement and evaluation of local electrical properties by microwave atomic force microscope | |
| Contactless measurement and quantitative evaluation of the electrical characteristics of doped GaAs wafers using microwave hall effect | |
| Quantitative evaluation of the dielectric constant of living cells by terahertz waves | |
| Study on differentiation of mesenchymal stem cell to tenocyte using cyclic mechanical stimulation with cell orientation control | |
| Ultraprecision Engineering (Shamoto lab.) |
Study on on-machine measurement of turning accuracy - Development and validation of measuring instrument utilizing image sensor |
| EHL analysis of CMP process with an airbag type polishing head | |
| Proposal of re-scheduling method for responding agilely to unexpected jobs keeping constant productivity rate | |
| Job shop scheduling problem considering blocking status of machines - Modification of schedule guaranteeing feasibility of planned schedule and theoretical analysis - |
|
| Proposal of fluid bearing utilizing electromagnetic force | |
| Cutting process and tool damage in High-speed ceramic milling of heat resistant super alloys | |
| Manufacturing Process (Umehara lab.) |
The effect of additives and oil temperature on wear of DLC under oil lubrication |
| The development of small amout wear evaluation and transformed layer thickness by friction under lubrication by reflective transmittion spectroscopy | |
| The tribological porperty comparison of IBAD CNx and DLC coating | |
| Design guide proposal for the practical use of ultra-high-speed deposition of DLC employing high-density near plasmas | |
| Observation and control of source gas depletion for unifrom distribution in internal DLC coating of narrow tubes | |
| The compatibility condition of sharpness for carbon fiber and high wear proof drill for drilling of CFRP | |
| Computational Solid Mechanics (Ohno lab.) Adjunct:Department of Computational Science and Engineering |
Analysis of swelling induced buckling patterns of a gel film with holes in a square array |
| Elastic-viscoplastic homogenization analysis of thick tube plates subjected to internal pressure | |
| Implementation of a transient/steady-state creep model in finite element methods | |
| Monte-Carlo analysis on dislocation sources activated in polycrystals using a discrete dislocation plasticity approach | |
| Atomistic instability analysis of compressive buckling behavior of vertically-aligned CNTs | |
| Homogenized elastic analysis of tube-fin structures used in intercoolers | |
| Fundamental study for atomic-scale analysis of plastic deformation in beta-Sn |
Mechanical Engineering Science：Thermo-Fluids and Environmental Engineering
| High-temperature energy conversion engineering (Naruse lab.) |
Study on effects of flue gas circulation on NOX emission in coal combustion |
|---|---|
| Study on combustion characteristics of pulverized coal by air mixed with hydrogen | |
| Study on analysis of hazardous trace elements in gas by LIBS | |
| Study on ash deposition on a heat transfer tube and its control in a waste incinerator | |
| Study on tar decomposition characteristics during high-temperature steam gasification of plastic wastes | |
| Study on coking technology by carbonaceous resources with high oxygen content | |
| Study on removal of gaseous mercury by sorbents derived by waste products | |
| Statistical Fluid Engineering (Sakai lab.) |
Experimental study on the effect of a freestream turbulence on statistical characteristics of a turbulent boundary layer |
| Investigation of the turbulent energy transport mechanism involved with coherent structures in a plane jet | |
| Experimentel study on turbulent diffution with chemical reactions | |
| Study on scalar mixing in regular and fractal grid turbulence by PIV-PLIF simultaneous measurement | |
| Study on the interaction between grid turbulence and shock wave | |
| Direct numerical simulation of mutual interfereces between isotropic turbulence and a plane shock wave | |
| Heat Transfer & Combustion Engineering (Yamashita lab.) |
Effect of Swirl Flow on Combustion Field in Cyclone-Jet Combustor |
| Numerical Simulation of DPF Regeneration Process | |
| Numerical Study on Combustion Behavior of Fuel Spray Injected into High Temperature Air | |
| Numerical Study on Combustion Characteristics in Porous Medium Injector of Ultra-micro Combustor with Hydrogen Fuel (In the Case of Fibrous Porous Media) | |
| Evaluation on DPF Performance of SiC Fiber Felt | |
| Investigation of Dominant Parameter for Flame Structure Using Hydrogen/air Premixed Flame with Curvature | |
| Study of Effects of Inert Gases on Combustion Characteristics of Premixed Flame by OH-PLIF | |
| Numerical Study on Combustion Characteristic in Ultra-micro Combustor with Porous Wall Considering Surface Reaction |
Mechano-Informatics and Systems：Biomechanics and Human-Machine Systems
| Biomechanics (Tanaka lab.) |
Modeling of Mechanical Properties in Brain and Functional Damage in Axon |
|---|---|
| Simulation study of mechanisms of hip fractures in backward falls | |
| Development of experimental evaluation system for hip protector and evaluation of shock-absorbing function | |
| Modeling of Orthotropy and Viscoelasticity of Skin | |
| Development of a Finite Element Model for Aging Effects on Femur | |
| Safety Intelligence (Yamada lab.) |
Relative Contribution Ratios in Force Perception and Effects on Tracing Movements of the Skin Sensation to Fingertip |
| Proposal of extrapolation simulation for human-robot collisions by use of human avoidance action models based on psychological experiments | |
| Risk Estimation against Mechanical Hazards Approaching Human’s Eyes Taking into Consideration Human Avoidance/Mitigation Actions | |
| Safety Intelligence (Obinata lab.) |
Development of Power-Assisted Orthosis pHALO for Paraplegics |
| Control of Walking Direction on the Neuro-Musculo-Skeletal Walking Model | |
| Human System Engineering (Mizuno lab.) |
Occupant safety in rear seat in car collisions |
| Contact sensing to detect vehicle pedestrian impact |
Mechano-Informatics and Systems：Micro-Nano Mechanical Systems
| Micro-Nano System Controle Engineering (Fukuda lab.) |
Measurement and evaluation of catheter movement by non-contact optical sensor |
|---|---|
| Two-directional flow bio-reactor for platelet production | |
| Control of next-generation mobility by center of gravity | |
| Recognition of operational region by advanced Flood Fill for mobility control | |
| Passive high-precision assembly algorithm for ring objects | |
| Design and evaluation of platinum catalytic micro-nano mobile robot | |
| Design and Simulation of Stochastic Decision Making Model of DNA Strand Displacement Robot by Artificial Immune System | |
| Biochemical Micro System Engineering (Arai lab.) |
Bionic simulator using explanted organs |
| Laser fabrication and laser manipulation of 3D nanorobot | |
| Evaluation of thermal conduction of a single carbon nanotube using fluorescent measurement | |
| Onchip cell manipulation and measurement using magnetically driven microtools | |
| Fabrication of 3D microscopic blood vessel model | Mechanics & Electronics Engineering (Hata lab.) |
Evaluation of mechanical strength of Si microstructures produced by MEMS process |
| Cylindrical thermal microsensor fabricated by multiple etching process | |
| Impact test of thin single crystal silicon film | |
| Micromachined biodegradable needle for transdermal drug delivery system | |
| Integration of temperature detection onto catheter flow sensor for evaluating lung function | |
| Micro Thermal Fluid Engineering (Niimi lab.) |
Measurement of Energy Accommodation Coefficient on Non-Metal Surfaces |
| Study on Characterisitics and Scattering Behavior of Molecular Beam |
- ▲ Engineering experience in Nagoya
Furo-cho, Chikusa-ku, Nagoya, 464-8603, JAPAN
Graduate School and School of Engineering
School of Engineering Bild.2 Room 343
TEL :+81-(0)52-789-3301
FAX :+81-(0)52-789-3111
Page Top