Course: Mechanical Engineering
Department of Mechanical and Aerospace Engineering, Faculty of Engineering
Course: Mechanical Engineering Science, Mechano-Informatics and Systems
Department of Mechanical Science and Engineering, Graduate School of Engineering
HOME > Thesis titles
|
（Academic Year 2011）Mechanical Engineering Science：Advanced Materials and Manufacturing
| Material Characterization & Mechanics (Ju lab.) |
Optimization of the method to fabricate Sn nanoparticles and evaluation of their size effects on the melting point |
|---|---|
| Evaluation of mechanical properties of Au nanowires fabricated by AAO template method | |
| A study on healing of fatigue damage on metal surface by controling high-density current field | |
| Fabrication of copper oxide nanowires using stress migration induced by selective deposition of metal films | |
| Measurement and evaluation of electrical properties using microwave atomic force microscope | |
| Microwave nondestructive evalutation of defects in a metal pipe | |
| A study on the detection of delaminations in unidirecional CFRP by microwave reflectometry | |
| Ultraprecision Engineering (Shamoto lab.) |
Optimization of Sine Curve Based Velocity Profile |
| Design of a new controller for dual-motor driven servo system by utilizing synchronization control technique | |
| Experimental investigation of process damping in turning operations | |
| Experimental study on wear suppression mechanism of diamond tool in intermittent cutting of steel | |
| Contorol of chip flow in turning with grooved rake face -Expansion of application and Analysis of cutting energy- | |
| Re-scheduling for an irregular job by heuristic rules | |
| Development of CAM for 4-axis controlled sculpturing | |
| Evaluation of nonlinear visco-elasticity of polishing pad - Development of on-machine compression tester and Identification method - | |
| Manufacturing Process (Umehara lab.) |
Fudamental research for the development of cooling radio knife tip to prevent blood coagulation on the tip |
| Adhesion property improvement and low-temperature synthesis of Si-CNxHy coating with Plasma CVD | |
| Fundamental research for high friction and small wear brake pad | |
| Effect of inner blade speed for cutting sharpness of electric shaver | |
| Clarification of the relationship between transfer layer and friction coefficient of carbonaceous coating | |
| Wear mode analysis of DLC by observing wear particles in DLC/DLC sliding in oil | |
| Development of droplet free CNx coating with Ion Beam Assited Deposition | |
| Computational Solid Mechanics (Ohno lab.) |
Fundamental analysis on effects of piled-up dislocations on adjacent grain using discrete dislocation plasticity approach |
| First-principles study on slip deformation paths in b-Sn | |
| Homogenized elastic bending analysis of plate-fin structures in intercoolers | |
| Comparison of severe thermal loading analyses using shell and solid elements | |
| Theoretical modeling of ideal shear strength of single crystals | |
| Homogenization analysis of corrugated profile effects on compressive strength of multilayered corrugated paperboard |
Mechanical Engineering Science：Thermo-Fluids and Environmental Engineering
| High-temperature energy conversion engineering (Naruse lab.) |
Effect of Coal Blending on Ash Deposition Characteristics in Pulverized Coal Combustion Boiler |
|---|---|
| Gasification Behavior of Coke Containing Woody Biomass | |
| Degradation Characteristics of SOFC by Trace Elements in Coal Gasified Gas | |
| Development of Recycling Method for Waste Lubricating Oil Using Solvent Extraction with Rubber Membrane | |
| Self-Ignition Property of Carbonized Fuel from Waste | |
| Combustion Characteristics of Municipal Waste in O2-CO2 Atmosphere | |
| Oxy-Fuel Combustion Characteristics of Coal in Bubbling Fluidized Bed | |
| Statistical Fluid Engineering (Sakai lab.) |
Elucidation of the characteristics of fractal generated turbulence field |
| Experimental research on the structural development of turbulent boundary layer in grid turbulence | |
| Development of micro sensor for the measurement of wall shear stress | |
| Research on the characteristics of the jet scalar diffusion field, and on the microscopic region concentration measurement by LIF method with optical fibers | |
| Study on the Separated-Reattaching Flow between the Blades | |
| Elucidation of pulsatile flow field in cerebral aneurysm by PIV | |
| Manufacturing hot-wire anemometer and cold-wire thermometer, and study of simultaneous measurement of velocity and temperature in axisymmetric jet | |
| Heat Transfer & Combustion Engineering (Yamashita lab.) |
Numerical study on combustion characteristic in porous medium injector of ultra-micro combustor (In case of methane) |
| Development of exhaust gas after-treatment with SiC fiber felt | |
| Digital material and effect of pore structure on soot deposition in DPF | |
| Investigation of interaction between wall and premixed flame by OH-PLIF | |
| Study on soot formation and combination method predicting soot emission in diffusion Flame | |
| Numerical study on influence of droplet size and number density on flame propagation characteristic in fuel spray | |
| A study on combustion field in a slit burner by simultaneous PIV/OH-PLIF |
Mechano-Informatics and Systems：Biomechanics and Human-Machine Systems
| Safety Intelligence (Yamada・Obinata lab.) |
|---|
| Simulation of Human Walking with Outfit for Keeping Balance Upper Body |
| Development of Annularly-shaped Vision-Based Tactile Sensor and Measurement of Thin-Type Four-axis Force |
| Study of Operability Movement Steering System Using Lever Steering |
| Analysis on Hand Motions to Develop a Helpful Robot Hand in Activity of Daily Living. |
| A Study on the Influence of Mental Workload on Braking Timing of Drivers and Their Eye Behavior |
Mechano-Informatics and Systems：Micro-Nano Mechanical Systems
| Mechanics & Electronics Engineering (Sato lab.) |
Development of biocompatible catheter type flow sensor |
|---|---|
| Biodegradable microneedle for transdermal drug delivery system | |
| Irreversible deformation of single-crystal-silicon thin-film at 500 degrees C | |
| MEMS capacitive force sensor for evaluating mechanical properties of biological sample | |
| Manipulation of magnetic wire for droplet-based micro-TAS | |
| Study on noise reduction for fabric force sensor | |
| Fabrication of MEMS shear stress sensor | |
| Micro Thermal Fluid Engineering (Niimi lab.) |
Experimental study on energy accommodation coefficients for noble gases-Pt surface |
| Visualization measurement of micro-gas flows by pressure-sensitive moleculer sensor | |
| Development of velocimetry technique for micro gaseous flows | |
| Measurement of tangnetial momentum accommodation coefficients using a microtube | |
| Biochemical Micro System Engineering (Arai lab.) |
On-chip Force Measurement |
| Local Ablation by Micro-Electrode | |
| Single Cell Dispensing System | |
| Temperature Measurement of a Specific Cell Using Fluorescent Microsensor Manipulated by Optical Tweezers | |
| Separation and Collection of Cell Aggregates | |
| Design and Fabrication of Compact Wide-Range Load Sensor Using Quartz Crystal Resonator |
|
（Academic Year 2011）Mechanical Engineering Science：Advanced Materials and Manufacturing
| Material Characterization & Mechanics (Ju lab.) |
Microwave nondestructive evaluation of stress corrosion cracking |
|---|---|
| Fabrication of high density Cu nanowire array (with AAO template) and evaluation of its electrical and mechanical properties | |
| A study on contactless measurement of permittivity of liquid by microwaves | |
| A study on fabrication of high-aspect ratio tip of AFM probe by stress-induced method | |
| A study on development of a four-point atomic force microscope probe | |
| A study on quantitative evaluation of electronical mobility and carrier density of semiconductor wafer using terahertz waves | |
| Fracture mechanics evaluation of crack closure in fatigue crack healing by controlling high-density electric current field | |
| A study on the effect of fluxs on microwave reflow of lead-free solder | |
| A study on orientation and differentiation of mesenchymal stem cells under mechanical stretch with strain gradient | |
| Ultraprecision Engineering (Shamoto lab.) |
Study on Milling of Difficult-to-Cut Materials with Self-Propelled Rotary Tools - Fundamental investigation of rotary cutting proess and development of rotary milling cutter - |
| Re-entrant flowshop scheduling by mixed integer programming -Job assignments before optimization- | |
| Chatter Suppression in milling with Irrergular Pitch / Variable Helix End mills | |
| Study on Fluid Bearing Utilizing Traveling Waves -Development of Modular Piezoelectric Traveling-Wave Actuator and Precision Slider- | |
| Basic Study on Planning of Tool Posture for Collision Avoidance with Workpiece in Free-form Surface Machining -Simultaneous Consideration of Collision-free Posture and Posture Planning- | |
| Development of a transportation system with multiple conveyer belts -Conditions for transportation and scheduling- | |
| Study on Avoidance of Regenerative Chatter Vibration by Optimizing Tool Path/Posture and Cutting Conditions | |
| Development of 3DOF Elliptical Vibration Cutting System -Suppression of Self Excited Chatter Vibration Using Anisotropic Tool Shank - | |
| Manufacturing Process (Umehara lab.) |
Mechanism elucidation of peel-off of diamond-like cabon during heating and coolinf process |
| Mechanism elucidation of impact-induced wear start of diamond-like carbon | |
| Friction and wear property of carobn fiber brush | |
| Fundamental research on the friction controle of diamond-like carbon deposited by surface wave-excited plassma CVD |
Mechanical Engineering Science：Thermo-Fluids and Environmental Engineering
| High-temperature energy conversion engineering (Naruse lab.) |
Co-gasification Characteristics of Woody Biomass with Carbon Dioxide and Steam |
|---|---|
| Combustion and Ecological Characteristics of Upgraded Brown Coal and Hyper Coal-Residue Coal | |
| Reduction Characteristics of Iron Oxide by Carbonaceous Materials from Waste | |
| Ash Particle Behaviors in Coal Combustion | |
| Statistical Fluid Engineering (Sakai lab.) |
Simultaneous measurements of velocity and temperature and mixing enhancement in an axisymmetric jet |
| Schmidt (Prandtl) number dependence of scalar statistics in a turbulent jet | |
| Experimental study on the interference between grid turbulence and turbulent boundary layer | |
| Study on the Separated-Reattaching Flow between the Blades of Sirocco Fan | |
| Spatial development and decay characteristic of fractal grid turbulence | |
| Study on cause of formation to rupture in aneurysm by PIV experiment and simulation | |
| Heat Transfer & Combustion Engineering (Yamashita lab.) |
Flame structure and liftoff characteristics in a slit burner |
| Investigation of influence of wall materials on combustion characteristics of premixed flame interfered with wall | |
| Numerical study on combustion characteristics of rich-premixed gas spouted in high-temperature air flow by using ""extended IYH-skeletal chemical kinetics model | |
| Fire dynamics simulator and evacuation simulation | |
| Numerical simulation of flow and soot deposition in carbon fiber filter | |
| Numerical study on liftoff characteristics of a slit flame in fuel flow and bilateral air flows with different velocities | |
| Numerical study on influence of size and number density of droplet on spray combustion mode (In case of decane) |
Mechano-Informatics and Systems：Biomechanics and Human-Machine Systems
| Safety Intelligence (Obinata lab.) |
A Study for Physical Parameter Identification Method with Linear Fractional Transformation |
|---|---|
| Estimation of Driver's Fatigue Using Principal Component Analysis of Physiological Measures | |
| Hand Shape Estimation Using Projector-Camera Feedback System | |
| Study on Human Intention Estimating Technology for the Power Assist Device | |
| Measurement of Soft Object's Hardness by Vision-based Tactile Sensor | |
| Walking Speed Control by Use of Neural Oscillator Entrainment | |
| A Study on Rat's Walking with CPG Control | |
| Human-robot interaction in autism therapy |
Mechano-Informatics and Systems：Micro-Nano Mechanical Systems
| Mechanics & Electronics Engineering (Sato lab.) |
Biodegradable microneedle for transdermal absorption formulation |
|---|---|
| Intubation type flow sensor for measuring lung function | |
| Development of 2-axis capacitive shear stress sensor | |
| Flexible transparent touch panel with conductive liquid channel structure | |
| Palm size biochemical analysis system by using magnetic wires | |
| Observation of plasticity in micro single-crystal-silicon beam at temperature ranging from 350 to 500 degrees C | |
| Integration of temperature detection into catheter type respirometric sensor | |
| Micro Thermal Fluid Engineering (Niimi lab.) |
PSMF (pressure-sensitive molecular film) measurement of supersonic micro-gas flows |
| Experimental study on characteristics of molecular beams for molecular beam scattering measurement | |
| Development of measurement technique on energy accommodation coefficients for non-metal surfaces |
- ▲ Engineering experience in Nagoya
Furo-cho, Chikusa-ku, Nagoya, 464-8603, JAPAN
Graduate School and School of Engineering
School of Engineering Bild.2 Room 343
TEL :+81-(0)52-789-3301
FAX :+81-(0)52-789-3111
Page Top